How to adjust the MAM890 plc after the maintenance?
2. Adjust set data as below.OIL FILTER SET: 2000HO-A FILTER SET: 2000HAIR FILTER SET: 2000H LUBE SET: 2000HGREASE RESET: 2000HBELT RESET: 0000H
How to adjust the data after you do the maintenence?
Change the time data for the used and unused oil and filters every time when you do the maintenance. Filters Set, Lubricate Water Set, Grease Set change into 2000 H, Filters Used, Lubricate Water Set, Grease Set change into 0 H.
How to do the maintenance for the screw compressor?
Oil brand: Shell or Mobil ISO 46, synthetic compressor oil. After replace the filters, need to adjust the data for the oil and filters. If you don’t know how, please contact info@prcompressor.com.
How to connect the wires of the compressor and dryer?
For the 3 phases compressor usually needs to be connected with the 3 live wires and 1 ground wire. Some compressors also need to be connected with the neutral wire. If the compressor alarms or shows “phase wrong”, then need to...
